path: root/blog/src/a/mail_server_with_postfix.md

# Create a Mail server with Postfix, Dovecot, Spamassassin and OpenDKIM

The entry is going to be long because it's a *tedious* process. This is also based on [Luke Smith's script](https://github.com/LukeSmithxyz/emailwiz), but adapted to Arch Linux (his script works on debian-based distributions). This entry is mostly so I can record all the notes required while I'm in the process of installing/configuring the mail server on a new VPS of mine; also I'm going to be writing a script that does everything in one go, that will be hosted in [here](https://git.luevano.xyz/server_scripts.git).

This configuration works for local users (users that appear in `/etc/passwd`), and does not use any type of SQL. And note that most if not all commands executed here are run with root privileges.

More in depth configuration is detailed in the Arch Wiki for each package used here.

## Prerequisites

Basically the same as with the [website with Nginx and Certbot](https://blog.luevano.xyz/a/website_with_nginx.html):

* A domain name. Got mine on [Epik](https://www.epik.com/?affid=da5ne9ru4) (affiliate link, btw).
	* Later we'll be adding some **MX**  and **TXT** records.
	* I also recommend to add a **CNAME** for "mail" and "www.mail", to get SSL certificates.
* A VPS or somewhere else to host. I'm using [Vultr](https://www.vultr.com/?ref=8732849) (also an affiliate link).
	* Also `ssh` configured.
	* Ports 25, 587 (SMTP), 465 (SMTPS), 143 (IMAP) and 993 (IMAPS) open on the firewall (I use `ufw`).
	* With `nginx` and `certbot` setup and running.

## Postfix

[Postfix](https://wiki.archlinux.org/index.php/Postfix) is a "mail transfer agent" which is the component of the mail server that receives and sends emails via SMTP.

Install the `postfix` package:

```sh
pacman -S postfix
```

We have two main files to configure (inside `/etc/postfix`): `master.cf` ([master(5)](https://man.archlinux.org/man/master.5)) and `main.cf` ([postconf(5)](https://man.archlinux.org/man/postconf.5)). We're going to edit `main.cf` first either by using the command `postconf -e 'setting'` or by editing the file itself (I prefer to edit the file).

Note that the default file itself has a lot of comments with description on what each thing does (or you can look up the manual, linked above), I used what Luke's script did plus some other settings that worked for me.

Now, first locate where your website cert is, mine is at the default location `/etc/letsencrypt/live/`, so my `certdir` is `/etc/letsencrypt/live/luevano.xyz`. Given this information, change `{yourcertdir}` on the corresponding lines. The configuration described below has to be appended in the `main.cf` configuration file.

Certificates and ciphers to use for authentication and security:

```conf
smtpd_tls_key_file={yourcertdir}/privkey.pem
smtpd_tls_cert_file={yourcertdir}/fullchain.pem
smtpd_use_tls = yes
smtpd_tls_auth_only = yes
smtp_tls_security_level = may
smtp_tls_loglevel = 1
smtp_tls_CAfile={yourcertdir}/cert.pem
smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3, !TLSv1, !TLSv1.1
smtp_tls_mandatory_protocols = !SSLv2, !SSLv3, !TLSv1, !TLSv1.1
smtpd_tls_protocols = !SSLv2, !SSLv3, !TLSv1, !TLSv1.1
smtp_tls_protocols = !SSLv2, !SSLv3, !TLSv1, !TLSv1.1
tls_preempt_cipherlist = yes
smtpd_tls_exclude_ciphers = aNULL, LOW, EXP, MEDIUM, ADH, AECDH, MD5,
				DSS, ECDSA, CAMELLIA128, 3DES, CAMELLIA256,
				RSA+AES, eNULL
smtpd_relay_restrictions = permit_sasl_authenticated, permit_mynetworks, defer_unauth_destination
```

Also, for the *connection* with `dovecot`, append the next few lines (telling postfix that `dovecot` will use user/password for authentication):

```conf
smtpd_sasl_auth_enable = yes
smtpd_sasl_type = dovecot
smtpd_sasl_path = private/auth
smtpd_sasl_security_options = noanonymous, noplaintext
smtpd_sasl_tls_security_options = noanonymous
```

Specify the mailbox home (this is going to be a directory inside your user's home):

```conf
home_mailbox = Mail/Inbox/
```

Pre-configuration to work seamlessly with `dovecot` and `opendkim`:

```conf
myhostname = {yourdomainname}
mydomain = localdomain
mydestination = $myhostname, localhost.$mydomain, localhost

milter_default_action = accept
milter_protocol = 6
smtpd_milters = inet:127.0.0.1:8891
non_smtpd_milters = inet:127.0.0.1:8891
mailbox_command = /usr/lib/dovecot/deliver
```

Where `{yourdomainname}` is `luevano.xyz` in my case, or if you have `localhost` configured to your domain, then use `localhost` for `myhostname` (`myhostname = localhost`).

Lastly, if you don't want the sender's IP and user agent (application used to send the mail), add the following line:

```conf
smtp_header_checks = regexp:/etc/postfix/smtp_header_checks
```

And create the `/etc/postfix/smtp_header_checks` file with the following content:

```conf
/^Received: .*/		IGNORE
/^User-Agent: .*/	IGNORE
```

That's it for `main.cf`, now we have to configure `master.cf`. This one is a bit more tricky.

First look up lines (they're uncommented) `smtp inet n - n - - smtpd`, `smtp unix - - n - - smtp` and `-o syslog_name=postfix/$service_name` and either delete or uncomment them... or just run `sed -i "/^\s*-o/d;/^\s*submission/d;/\s*smtp/d" /etc/postfix/master.cf` as stated in Luke's script.

Lastly, append the following lines to complete postfix setup and pre-configure for `spamassassin`.

```conf
smtp unix - - n - - smtp
smtp inet n - y - - smtpd
	-o content_filter=spamassassin
submission inet n - y - - smtpd
	-o syslog_name=postfix/submission
	-o smtpd_tls_security_level=encrypt
	-o smtpd_sasl_auth_enable=yes
	-o smtpd_tls_auth_only=yes
smtps inet n - y - - smtpd
	-o syslog_name=postfix/smtps
	-o smtpd_tls_wrappermode=yes
	-o smtpd_sasl_auth_enable=yes
spamassassin unix - n n - - pipe
	user=spamd argv=/usr/bin/vendor_perl/spamc -f -e /usr/sbin/sendmail -oi -f \${sender} \${recipient}
```

Now, I ran into some problems with postfix, one being [smtps: Servname not supported for ai_socktype](https://www.faqforge.com/linux/fix-for-opensuse-error-postfixmaster-fatal-0-0-0-0smtps-servname-not-supported-for-ai_socktype/), to fix it, as *Till* posted in that site, edit `/etc/services` and add:

```conf
smtps 465/tcp
smtps 465/udp
```

At this point you're done configuring `postfix` and you can already start/enable the `postfix` service:

```sh
systemctl start postfix.service
systemctl enable postfix.service
```

## Dovecot

[Dovecot](https://wiki.archlinux.org/index.php/Dovecot) is an IMAP and POP3 server, which is what lets an email application retrieve the mail.

Install the `dovecot` and `pigeonhole` (sieve for `dovecot`) packages:

```sh
pacman -S dovecot pigeonhole
```

On arch, by default, there is no `/etc/dovecot` directory with default configurations set in place, but the package does provide the example configuration files. Create the `dovecot` directory under `/etc` and, optionally, copy the `dovecot.conf` file and `conf.d` directory under the just created `dovecot` directory:

```sh
mkdir /etc/dovecot
cp /usr/share/doc/dovecot/example-config/dovecot.conf /etc/dovecot/dovecot.conf
cp -r /usr/share/doc/dovecot/example-config/conf.d /etc/dovecot
```

As Luke stated, `dovecot` comes with a lot of "modules" (under `/etc/dovecot/conf.d/` if you copied that folder) for all sorts of configurations that you can include, but I do as he does and just edits/creates the whole `dovecot.conf` file; although, I would like to check each of the separate configuration files `dovecot` provides I think the options Luke provides are more than good enough.

I'm working with an empty `dovecot.conf` file. Add the following lines for SSL and login configuration (also replace `{yourcertdir}` with the same certificate directory described in the Postfix section above, note that the `<` is required):

```conf
ssl = required
ssl_cert = <{yourcertdir}/fullchain.pem
ssl_key = <{yourcertdir}/privkey.pem
ssl_min_protocol = TLSv1.2
ssl_cipher_list = ALL:!RSA:!CAMELLIA:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS:!RC4:!SHA1:!SHA256:!SHA384:!LOW@STRENGTH
ssl_prefer_server_ciphers = yes
ssl_dh = </etc/dovecot/dh.pem

auth_mechanisms = plain login
auth_username_format = %n
protocols = $protocols imap
```

You may notice we specify a file we don't have under `/etc/dovecot`: `dh.pem`. We need to create it with `openssl` (you should already have it installed if you've been following this entry and the one for `nginx`). Just run (might take a few minutes):

```sh
openssl dhparam -out /etc/dovecot/dh.pem 4096
```

After that, the next lines define what a "valid user is" (really just sets the database for users and passwords to be the local users with their password):

```conf
userdb {
	driver = passwd
}

passdb {
	driver = pam
}
```

Next, comes the mail directory structure (has to match the one described in the Postfix section). Here, the `LAYOUT` option is important so the boxes are `.Sent` instead of `Sent`. Add the next lines (plus any you like):

```conf
mail_location = maildir:~/Mail:INBOX=~/Mail/Inbox:LAYOUT=fs
namespace inbox {
	inbox = yes

	mailbox Drafts {
		special_use = \Drafts
		auto = subscribe
		}

	mailbox Junk {
		special_use = \Junk
		auto = subscribe
		autoexpunge = 30d
		}

	mailbox Sent {
		special_use = \Sent
		auto = subscribe
		}

	mailbox Trash {
		special_use = \Trash
		}

	mailbox Archive {
		special_use = \Archive
		}
}
```

Also include this so Postfix can use Dovecot's authentication system:

```conf
service auth {
	unix_listener /var/spool/postfix/private/auth {
		mode = 0660
		user = postfix
		group = postfix
		}
}
```

Lastly (for `dovecot` at least), the plugin configuration for `sieve` (`pigeonhole`):

```conf
protocol lda {
	mail_plugins = $mail_plugins sieve
}

protocol lmtp {
	mail_plugins = $mail_plugins sieve
}

plugin {
	sieve = ~/.dovecot.sieve
	sieve_default = /var/lib/dovecot/sieve/default.sieve
	sieve_dir = ~/.sieve
	sieve_global_dir = /var/lib/dovecot/sieve/
```

Where `/var/lib/dovecot/sieve/default.sieve` doesn't exist yet. Create the folders:

```sh
mkdir -p /var/lib/dovecot/sieve
```

And create the file `default.sieve` inside that just created folder with the content:

```conf
require ["fileinto", "mailbox"];
if header :contains "X-Spam-Flag" "YES" {
	fileinto "Junk";
}
```

Now, if you don't have a `vmail` (virtual mail) user, create one and change the ownership of the `/var/lib/dovecot` directory to this user:

```sh
grep -q "^vmail:" /etc/passwd || useradd vmail -s /usr/bin/nologin
chown -R vmail:vmail /var/lib/dovecot
```

Note that I also changed the shell for `vmail` to be `/usr/bin/nologin`. After that, run:

```sh
sievec /var/lib/dovecot/sieve/default.sieve
```

To compile the configuration file (a `default.svbin` file will be created next to `default.sieve`).

Next, add the following lines to `/etc/pam.d/dovecot` if not already present (shouldn't be there if you've been following these notes):

```conf
auth required pam_unix.so nullok
account required pam_unix.so
```

That's it for `dovecot`, at this point you can start/enable the `dovecot` service:

```sh
systemctl start dovecot.service
systemctl enable dovecot.service
```

# OpenDKIM

[OpenDKIM](https://wiki.archlinux.org/index.php/OpenDKIM) is needed so services like G\*\*gle (we don't mention that name here \[\[\[this is a meme\]\]\]) don't throw the mail to the trash. DKIM stands for "DomainKeys Identified Mail".

Install the `opendkim` package:

```sh
pacman -S opendkim
```

Generate the keys for your domain:

```sh
opendkim-genkey -D /etc/opendkim -d {yourdomain} -s {yoursubdomain} -r -b 2048
```

Where you need to change `{yourdomain}` and `{yoursubdomain}` (doesn't really need to be the subdomain, could be anything that describes your key) accordingly, for me it's `luevano.xyz` and `mail`, respectively. After that, we need to create some files inside the `/etc/opendkim` directory. First, create the file `KeyTable` with the content:

```conf
{yoursubdomain}._domainkey.{yourdomain} {yourdomain}:{yoursubdomain}:/etc/opendkim/{yoursubdomain}.private
```

So, for me it would be:

```conf
mail._domainkey.luevano.xyz luevano.xyz:mail:/etc/opendkim/mail.private
```

Next, create the file `SigningTable` with the content:

```conf
*@{yourdomain} {yoursubdomain}._domainkey.{yourdomain}
```

Again, for me it would be:

```conf
*@luevano.xyz mail._domainkey.luevano.xyz
```

And, lastly create the file `TrustedHosts` with the content:

```conf
127.0.0.1
::1
10.1.0.0/16
1.2.3.4/24
localhost
{yourserverip}
...
```

And more, make sure to include your server IP and something like `subdomain.domainname`.

Finally, edit `/etc/opendkim/opendkim.conf` to reflect the changes (or rather, additions) of these files, as well as some other configuration. You can look up the example configuration file located at `/usr/share/doc/opendkim/opendkim.conf.sample`, but I'm creating a blank one with the contents:

```conf
Domain {yourdomain}
Selector {yoursubdomain}

Syslog Yes
UserID opendkim

KeyFile /etc/opendkim/{yoursubdomain}.private
Socket inet:8891@localhost
```

Now, change the permissions for all the files inside `/etc/opendkim`:

```conf
chown -R root:opendkim /etc/opendkim
chmod g+r /etc/postfix/dkim/*
```

I'm using `root:opendkim` so `opendkim` doesn't complain about the `{yoursubdomani}.private` being insecure (you can change that by using the option `RequireSafeKeys False` in the `opendkim.conf` file, as stated [here](http://lists.opendkim.org/archive/opendkim/users/2014/12/3331.html)).

That's it for the general configuration, but you could go more in depth and be more secure with some extra configuration as described in the [Arch Wiki entry for OpenDKIM](https://wiki.archlinux.org/index.php/OpenDKIM#Security).

Now, just start/enable the `opendkim` service:

```sh
systemctl start opendkim.service
systemctl enable opendkim.service
```

# Spamassassin